Look at the Lathe that Santa Brought Me!

He was chubby and plump, a right jolly old elf...

Clement Clarke Moore, A Visit from St. Nichols, 1823




What a wonderful thing, we got snow on Christmas Eve! It was only four inches, but there was still 10 inches on the ground from the last storm. It also got down to 0 degrees Fahrenheit last night!




Wow, look at this bench top lathe that I got! It is a sweet little lathe, it runs quiet and smooth! Just the thing for turning tool handles, tuning pegs and crochet hooks for my wife!

Comments

  1. AnonymousDecember 25, 2012 at 12:49 PM

    Sweet! Jealous here!

    ReplyDelete
  2. Wilson BurnhamDecember 26, 2012 at 12:40 PM

    It was either this lathe or a Nook for Christmas! The Nook would have been lighter!

    Wilson

    ReplyDelete

Post a Comment

Popular posts from this blog

How to Make a Traditional Froe Mallet

Image
What holds the Holy of the Holies, what did Brahma become? Wood. Why will aspen always tremble? For the nails driven into the cross. What makes the color of wood? The soil it tastes. Cradle, fiddle, coffin, bed: wood is a column of earth made ambitious by light, and made of beauty by the rain. Kim R. Stafford, Having Everything Right , 1986. Rive , verb, to split Shake , noun, a split in a piece wood. (Heart shake, ring shake) Shake , verb, (Middle English), to split. I know I should have been in the studio working on my back log of guitars, but the day was so nice and warm with a tall blue canopy, I couldn't stay inside. I decided that I needed to make a proper froe mallet. This style of mallet is traditional to northeastern California , primarily Tehama (where I'm from), Butte, Shasta and Plumas counties where making shingles by hand from sugar pines was an industry. I don't know if it was used in any other region along the Pacific Rim, other parts of the United S
Read more

The Guitar's Scale Length, Your Hand Size and a Chart

Image
I will cite the case of a marvelous concert player, a Japanese lady who is barely 5 ft. tall and with hands that are real miniatures. She plays a 664 mm 10 string guitar and demanded that I build this guitar with an action 1 mm higher than normal, which she handles with incredible ease. This is serious study! Jose Ramirez III, Things About the Guitar , 1990 Here is the hand size and scale length that I found on the forum at delcamp.com . Thumb tip to pinky tip span of 250mm+,  664mm scale length Thumb tip to pinky tip span of 230mm to 250mm,  656mm scale length Thumb tip to pinky tip span of 210mm to 230mm,  650mm scale length Thumb tip to pinky tip span of 190mm to 210mm,  640mm scale length Thumb tip to pinky tip span of 170mm to 190mm,  630mm scale length Thumb tip to pinky tip span of below 170mm,  615mm scale length Here is my flexible imperial/metric ruler. Here is my hand properly placed on the flexible imperial/metric ruler. Today my reach from lit
Read more

A New Tool

Image
When I build a new guitar, I need to shape the fretboard after it is glued onto the neck. The fretboard needs to be a flat taper, it gradually becomes thinner on the bass side then the treble side at the twelfth fret and this taper continues to the end of the board. This taper givea the bass strings extra room to vibrate, less chance of an open or fretted string hitting a fret. To achieve this I usually start with my Lie-Nielsen No.62 low angle jack plane and finish the job with long sanding blocks. The Lie-Nielsen is a wonderfully versatile plane, but it is a tad long for leveling the fretboard after it is glue to the guitar neck and the Lie-Nielsen low angle block plane is a little too short for the task. I decided to look at the low angle bevel up planes offered by Lee Valley. I bought a Veritas Small Bevel Up Smooth plane this early this month and I am very glad that I did. With just a little honing of the blade, it stepped up and did the tasks I asked of it, such as smoothing a p
Read more