Skip to main content

Late Summer, Early Fall and a Spruce/Ziricote Classical Guitar

Thus begins what many residents feel is the Southern Rockies' most beautiful time of the year - Indian summer.

Audrey DeLella Benedict, The Southern Rockies, 1991


It is sunny today with bluebird skies highlighting the golds and oranges of the aspen trees.

Fog covered our little hollow all day yesterday, the sun came out at exactly 4:45pm and shone upon us for fifteen minutes, then the clouds came back.



The aspens and ferns in the backyard...



A few wildflowers are blooming, like this harebell...


Our little flower garden is going to seed...



I dropped six ponderosa pine on our property last week for firewood and fire mitigation, as you can see I have much work to do splitting and stacking the firewood.


This is the latest guitar on the bench, a 1961 Hernandez y Aguado style guitar, with a Colorado Engelmann spruce top...



and ziricote back and sides.

I am in the process of pore filling, later this week I will start the French polish.

It has an incredibly loud tap tone, it will be wonderful guitar.

Now, get out to your shop and make something!

Comments

Popular posts from this blog

How to Make a Traditional Froe Mallet

What holds the Holy of the Holies, what did Brahma become? Wood. Why will aspen always tremble? For the nails driven into the cross. What makes the color of wood? The soil it tastes. Cradle, fiddle, coffin, bed: wood is a column of earth made ambitious by light, and made of beauty by the rain.

Kim R. Stafford, Having Everything Right, 1986.

Rive, verb, to split
Shake, noun, a split in a piece wood. (Heart shake, ring shake)
Shake, verb, (Middle English), to split.

I know I should have been in the studio working on my back log of guitars, but the day was so nice and warm with a tall blue canopy, I couldn't stay inside. I decided that I needed to make a proper froe mallet. This style of mallet is traditional to northeastern California, primarily Tehama (where I'm from), Butte, Shasta and Plumas counties where making shingles by hand from sugar pines was an industry. I don't know if it was used in any other region along the Pacific Rim, other parts of the United States or even o…

Basic Hand Tool Kit for Making a Classical Guitar, Revised

Ours is really a simple craft.

James Krenov, The Impractical Cabinetmaker, 1979


So, you want to build a guitar.

Since the original post, Basic Hand Tool Kit for Guitar Making, click here to see it, is the most popular post on this blog, I thought I would revisit it and adjust it to what I am using now to make a classical guitar.

The first thing I recommend doing is to buy or borrow copies of the following books:

Guitar Making: Tradition and Technology, by William Cumpiano and Jonathan Natelson
Making Master Guitars, by Roy Courtnall
The Guitar Maker's Workshop, by Rik Middleton

These are required reading before you begin making a guitar.

Also required reading are these books by Roy Underhill:

The Woodwright's Shop
The Woodwright's Companion
The Woodwright's Workbench
The Woodwright's Apprentice


Why these books by Mr. Underhill? You will learn valuable wood working techniques if you make any of his projects. The dovetail joints used to join a drawer together are far mor…

The Guitar Maker's Backsaw for Cutting Fret Slots

The overall correct process of placing frets in a guitar fingerboard ("fretting"), is far less straight forward than most people believe. A perfect job, for perfect playability, requires some careful preparation.

Anthony Lintner, guitar maker



Twenty five years ago, I bought my first fretting saw from Luthiers Mercantile. It was made in Germany and had a straight handle on it, basically it was a gent's saw.

First thing I did to the saw was to take off the straight handle and make a nice handle for it from some wonderful Claro walnut that came from a Cottonwood Creek bottom wild grown walnut. I used it to cut fret slots in dulcimer and classical guitar fret boards. The saw served me well for several years until I made the mistake of cutting some brass with it.

Well, I never did get around to sharpening the thing.

The blade is .015 of an inch thick with the teeth set at .022-.023 of an inch. I think it has 22 teeth per inch. It is a great saw and I was very sad to see that…